<feed xmlns='http://www.w3.org/2005/Atom'>
<title>otpGarmin/source/storage, branch v0.9.0</title>
<subtitle>OTP Wallet for Garmin Connect IQ: offline one-time passwords and barcodes.</subtitle>
<id>https://git.cirakg.xyz/otpGarmin/atom?h=v0.9.0</id>
<link rel='self' href='https://git.cirakg.xyz/otpGarmin/atom?h=v0.9.0'/>
<link rel='alternate' type='text/html' href='https://git.cirakg.xyz/otpGarmin/'/>
<updated>2026-10-25T11:46:42+00:00</updated>
<entry>
<title>feat(pin): exactly 4 digits, entered on the 4th digit</title>
<updated>2026-10-25T11:46:42+00:00</updated>
<author>
<name>cirakg</name>
<email>cirakg@cirakg.xyz</email>
</author>
<published>2026-10-25T11:46:42+00:00</published>
<link rel='alternate' type='text/html' href='https://git.cirakg.xyz/otpGarmin/commit/?id=096b5a4d17c85fa5f87db3e72364e9c3506d1e64'/>
<id>urn:sha1:096b5a4d17c85fa5f87db3e72364e9c3506d1e64</id>
<content type='text'>
The keypad has no OK key; the 4th digit submits, so a tap that also
arrives as START can no longer submit a partial PIN (the likely cause
of "Wrong PIN" before the code opened). PINs set by earlier versions
still unlock and are then replaced by a 4-digit one. Opening an entry
ignores a second request from the same tap. A Require PIN sent from
the phone while the watch is locked now applies at the next PIN
instead of waiting for Confirm all. The linter skips .claude.

Co-Authored-By: Claude Opus 5.5 &lt;noreply@anthropic.com&gt;
</content>
</entry>
<entry>
<title>feat(glance): show the favourite code in the glance (opt-in)</title>
<updated>2026-10-21T01:55:10+00:00</updated>
<author>
<name>cirakg</name>
<email>cirakg@cirakg.xyz</email>
</author>
<published>2026-10-21T01:55:10+00:00</published>
<link rel='alternate' type='text/html' href='https://git.cirakg.xyz/otpGarmin/commit/?id=5e8ac1e2f5a660e55ea132996e1d5730cfa4fa64'/>
<id>urn:sha1:5e8ac1e2f5a660e55ea132996e1d5730cfa4fa64</id>
<content type='text'>
With "Show the favourite code in the glance" on, the glance shows the
code of the first favourite TOTP or Steam entry without the PIN, with a
countdown bar. The glance can't open the vault, so the About scan seals
that entry under "g" (device key, aad OTPW-GL-1) after every change, and
removes it when the option is off or no entry qualifies; the glance also
reads the option itself. HKDF moves to its own module so the glance loads
only the crypto it needs (37 % of its 64 KB). Manage entry gains "Mark as
favourite (glance)" and "Remove favourite", queued for locked entries
like the other changes. Lines are inset on round screens so the
Instinct 3's curved glance corner doesn't cut them.

Co-Authored-By: Claude Opus 5.5 &lt;noreply@anthropic.com&gt;
</content>
</entry>
<entry>
<title>feat(settings): add the Add OTP, Add code and Manage entry forms with a PIN queue for locked entries</title>
<updated>2026-10-20T16:36:54+00:00</updated>
<author>
<name>cirakg</name>
<email>cirakg@cirakg.xyz</email>
</author>
<published>2026-10-20T16:36:54+00:00</published>
<link rel='alternate' type='text/html' href='https://git.cirakg.xyz/otpGarmin/commit/?id=151bfda5d4c567ff909a61dc9c90bf8eece1db37'/>
<id>urn:sha1:151bfda5d4c567ff909a61dc9c90bf8eece1db37</id>
<content type='text'>
The full phone settings form (README 10.2) and its processing (10.3) as one
resumable job: Import, Add OTP, Add code, Manage, then the About fields.
Forms are applied only when their switch is on, cleared afterwards (secret
first; only the secret after a problem), deduplicated by keyed hash, and
report into their Result field and the results screen.

- Add OTP validates per README 10.4; Add code runs the real encoder
  (CodeCheck, a job for 2D codes) and caches 2D codes on the way in.
- Manage entry: edit, move, require/drop PIN, replace, counter, delete.
  Changes to locked entries are sealed under "q" and applied only after
  the PIN is entered under "Phone changes" in the menu.
- About: catalog (800 characters max), version, storage use.
- "Encrypt names" now applies to new and existing entries.

Co-Authored-By: Claude Opus 5.5 &lt;noreply@anthropic.com&gt;
</content>
</entry>
<entry>
<title>feat(ui): show QR codes, encoded once with progress and cached sealed per entry</title>
<updated>2026-10-20T04:56:58+00:00</updated>
<author>
<name>cirakg</name>
<email>cirakg@cirakg.xyz</email>
</author>
<published>2026-10-20T04:56:58+00:00</published>
<link rel='alternate' type='text/html' href='https://git.cirakg.xyz/otpGarmin/commit/?id=2df98d1ba129f95a10c6b81665671d3b12560c79'/>
<id>urn:sha1:2df98d1ba129f95a10c6b81665671d3b12560c79</id>
<content type='text'>
Co-Authored-By: Claude Opus 5.5 &lt;noreply@anthropic.com&gt;
</content>
</entry>
<entry>
<title>feat(storage): add keyed secret fingerprints to record headers</title>
<updated>2026-10-19T23:51:05+00:00</updated>
<author>
<name>cirakg</name>
<email>cirakg@cirakg.xyz</email>
</author>
<published>2026-10-19T23:51:05+00:00</published>
<link rel='alternate' type='text/html' href='https://git.cirakg.xyz/otpGarmin/commit/?id=bc228753bfb4a2faea540cddb20fc39ebd265db5'/>
<id>urn:sha1:bc228753bfb4a2faea540cddb20fc39ebd265db5</id>
<content type='text'>
An 8-byte HMAC of kind, type and secret (key derived from the device key)
in header tag 13 lets imports find duplicates of locked entries while the
watch is locked. Vault gains anyHeader() and storage().

Co-Authored-By: Claude Opus 5.5 &lt;noreply@anthropic.com&gt;
</content>
</entry>
<entry>
<title>feat(ui): add the list, OTP detail, PIN entry, menu, info screens and glance</title>
<updated>2026-10-19T20:28:09+00:00</updated>
<author>
<name>cirakg</name>
<email>cirakg@cirakg.xyz</email>
</author>
<published>2026-10-19T20:28:09+00:00</published>
<link rel='alternate' type='text/html' href='https://git.cirakg.xyz/otpGarmin/commit/?id=35042ff04ffc50e55ff59a385849442be4429d6b'/>
<id>urn:sha1:35042ff04ffc50e55ff59a385849442be4429d6b</id>
<content type='text'>
List with live codes and countdowns, adaptive rows and lazy headers; OTP
detail with ring or bar, next code and HOTP next; PIN keypad or button
selector with create, unlock, change, lockout display and pending
promotion; native menu; glance with the entry count; self-test after the
first frame; option properties with defaults. Codes are computed one per
timer event, apart from drawing, for the watchdog. A UI-test build
(uitest.jungle) starts with fake entries, PIN 123456 and a frozen clock.

Co-Authored-By: Claude Opus 5.5 &lt;noreply@anthropic.com&gt;
</content>
</entry>
<entry>
<title>feat(storage): add the encrypted vault, PIN keys, lockout, session and migrations</title>
<updated>2026-10-19T13:27:37+00:00</updated>
<author>
<name>cirakg</name>
<email>cirakg@cirakg.xyz</email>
</author>
<published>2026-10-19T13:27:37+00:00</published>
<link rel='alternate' type='text/html' href='https://git.cirakg.xyz/otpGarmin/commit/?id=dd5d0f68726fe56ee4d199867d414aea81905cc4'/>
<id>urn:sha1:dd5d0f68726fe56ee4d199867d414aea81905cc4</id>
<content type='text'>
Records are one ByteArray each: a readable TLV header plus an
encrypt-then-MAC box whose aad binds the entry ID and the header. The
device key seals unlocked entries and pending items; a random master key,
wrapped under a PBKDF2 PIN key, seals locked ones. Wrong PINs are counted
before the check, with delays on the trusted clock and an uptime fallback.
Bytes.toUtf8 validates UTF-8 first, because the native conversion crashes
on invalid input.

Co-Authored-By: Claude Opus 5.5 &lt;noreply@anthropic.com&gt;
</content>
</entry>
</feed>
