otpGarmin/source/ui, branch v1.0.0

fix(pin): the work after a PIN and the change queue run in steps

2026-10-27T00:01:18+00:00

After a correct or new PIN, promoting pending entries and applying waiting "Require PIN" changes ran in the event of the last PBKDF2 step; 16 waiting changes tripped the watchdog on the Forerunner 70. ChangeQueue.LockJob now does it in steps while the PIN screen shows "Checking...", saves what it did to the results and refreshes the glance after Set PIN too. The list title decrypted every waiting change at each start. Queue items are now [action, box] (aad OTPW-Q-2 + action code), so they are counted without decrypting; 0.9.0 items are still read. A replacement is checked when it arrives and its material is sealed apart (qm.). Large buffers are wiped and UTF-8-checked in pieces (Jobs.Wiper, Bytes.utf8Prefix, SealedBox.openKeep/sealKeep). "Phone changes" reads behind "Reading...", and Confirm all / Reject all act only on the changes shown. Storage full no longer stops the app at the PIN. Found by the review of b8addc8/096b5a4 and a new make watchdog test; the diff was reviewed again and its findings fixed. fr70: make lint, make test (176), make watchdog (19 cases at two steps per event), make screenshots pass; list_locked and list_reset goldens show "Results ready (menu)". Co-Authored-By: Claude Opus 5.5

fix(pin): START never submits on touch; Change PIN asks once after a legacy PIN

2026-10-26T14:20:20+00:00

A legacy PIN (0.8.0 or earlier) on a touch screen was still submitted by START, and a tap that also arrives as START could submit the digits typed so far as a counted wrong PIN. The OK key is tapped instead. "Change PIN" while locked with a legacy PIN asked for the new PIN twice: the forced new PIN after the unlock is now the change. Found in the review of b8addc8 and 096b5a4. make test and make screenshots pass on the Forerunner 70. Co-Authored-By: Claude Opus 5.5

test(ui): second UI scenario, and the fixes it found

2026-10-25T22:51:52+00:00

A second UI-test build (uitest-extra.jungle) covers the legacy PIN and the forced new PIN, Change and Reset PIN, a queued Require PIN, UPC-A, Code 39, the code error screen, the encoding progress, auto-lock on a barcode, the light theme and the glance without a code; the main flow adds the Steam and Library details and the menu's text screens. Fixed from what it found: Entry IDs tripped the watchdog with 110 entries; auto-lock didn't close a locked barcode; a queued Require PIN showed "Confirm in menu"; locked barcodes lacked the padlock; the PIN keypad's bottom row, the Reset PIN question, text-screen bottoms, the glance title and the light-theme warning colour. Goldens approved on all seven watches; only the Forerunner 70 was re-verified after the version bump. Co-Authored-By: Claude Opus 5.5

fix(codes): encoding progress follows the work

2026-10-25T13:17:45+00:00

The QR percentage counted phases and the display froze at 90 % once encoding ended, so the first opening sat at 90 % while the slow stages ran. Each 2D symbology now weights its phases by measured cost, interpolates inside the long ones, and the display splits encode, pack and runs; a cached code counts its runs from 0. Co-Authored-By: Claude Opus 5.5

fix(ui): vertical swipes and drags scroll the list and text screens

2026-10-25T12:13:39+00:00

The Forerunner 70 sends no page behaviour for a swipe on a custom view, so the list and info screens only scrolled with the buttons. Swipes and drags now scroll them directly; one gesture scrolls once even when the device also sends the page behaviour, and a drag's release opens no row. Co-Authored-By: Claude Opus 5.5

feat(pin): exactly 4 digits, entered on the 4th digit

2026-10-25T11:46:42+00:00

The keypad has no OK key; the 4th digit submits, so a tap that also arrives as START can no longer submit a partial PIN (the likely cause of "Wrong PIN" before the code opened). PINs set by earlier versions still unlock and are then replaced by a 4-digit one. Opening an entry ignores a second request from the same tap. A Require PIN sent from the phone while the watch is locked now applies at the next PIN instead of waiting for Confirm all. The linter skips .claude. Co-Authored-By: Claude Opus 5.5

feat(glance): show the favourite code in the glance (opt-in)

2026-10-21T01:55:10+00:00

With "Show the favourite code in the glance" on, the glance shows the code of the first favourite TOTP or Steam entry without the PIN, with a countdown bar. The glance can't open the vault, so the About scan seals that entry under "g" (device key, aad OTPW-GL-1) after every change, and removes it when the option is off or no entry qualifies; the glance also reads the option itself. HKDF moves to its own module so the glance loads only the crypto it needs (37 % of its 64 KB). Manage entry gains "Mark as favourite (glance)" and "Remove favourite", queued for locked entries like the other changes. Lines are inset on round screens so the Instinct 3's curved glance corner doesn't cut them. Co-Authored-By: Claude Opus 5.5

fix(codes): bound every 2D encoding step under the watchdog; draw large codes from runs

2026-10-21T01:55:01+00:00

M6's step sizes were estimates, only exercised with small codes. With the largest inputs the app accepts, every 2D encoder tripped the watchdog on the Forerunner 255S (and the biggest steps were far over the 768 KB watches' limit), so a large code added from the phone would have stopped the app during settings processing at every start. - QR: resumable segmentation, Reed-Solomon, interleaving, function patterns and final mask; mask scoring on rows and columns packed 16 modules per word (same penalties, checked against the per-module rules). - Reed-Solomon: resumable field tables and generator, encoder shifting with native slice. - Data Matrix, Aztec, PDF417: resumable encodation, stuffing, compaction, placement and build; Data Matrix's grid as a byte array (90 KB -> 35 KB); PDF417 refuses text that can't fit the screen before compacting. - Cache format 2 with 16-bit sizes (wide PDF417 was cached wrong); packing in steps; codes drawn as runs, and from a bitmap painted in steps when a frame can't draw all runs. - The job runner does two steps per tick on 768 KB watches; gen_products --check verifies each product's watchdogCount fits that. - CodeView renews full brightness (AMOLED) or the backlight (MIP) for up to a minute from its single ticker; a tap restarts the minute. Co-Authored-By: Claude Opus 5.5

feat(settings): add the Add OTP, Add code and Manage entry forms with a PIN queue for locked entries

2026-10-20T16:36:54+00:00

The full phone settings form (README 10.2) and its processing (10.3) as one resumable job: Import, Add OTP, Add code, Manage, then the About fields. Forms are applied only when their switch is on, cleared afterwards (secret first; only the secret after a problem), deduplicated by keyed hash, and report into their Result field and the results screen. - Add OTP validates per README 10.4; Add code runs the real encoder (CodeCheck, a job for 2D codes) and caches 2D codes on the way in. - Manage entry: edit, move, require/drop PIN, replace, counter, delete. Changes to locked entries are sealed under "q" and applied only after the PIN is entered under "Phone changes" in the menu. - About: catalog (800 characters max), version, storage use. - "Encrypt names" now applies to new and existing entries. Co-Authored-By: Claude Opus 5.5

feat(ui): show Data Matrix and PDF417 codes; fit 2D codes inside round screens

2026-10-20T09:24:58+00:00

Co-Authored-By: Claude Opus 5.5